Your teacher writes your IA2. This is the QCAA sample, so use it for the question shapes, and ask your teacher for practice that matches your school’s paper.
The most suitable material to use as a sacrificial anode for a steel structure is
Not quite. Steel is mostly iron, so iron is no more reactive than the steel. It would not corrode in place of the steel, and it gives no protection.
That is it. Step through the hints below to see why.
Not quite. Copper is less reactive than steel. Connected to the steel, it would make the steel the anode and speed up its corrosion.
Not quite. Stainless steel is less reactive than plain steel. Connected to the structure, it would make the plain steel the anode and speed up its corrosion.
Left: a steel pile standing in sea water, wired to a block of the metal in the option you are testing. Orange spots are rust. The dashed square is the block at its starting size. Right: a reactivity ladder that follows the galvanic series in sea water from topic guide 3. Steel is on it already. Each metal takes its place when you test it, outlined in orange. Where the series does not rank two metals against each other, they share a rung.
Nothing is being tested yet. Choose Test (A), (B), (C) or (D) above.
Iron is no more reactive than the steel, so nothing makes the block corrode in place of the pile. Both rust at their usual rate, and the pile gets no protection.
Zinc is more reactive than iron, so the zinc block becomes the anode and corrodes first. Its electrons flow along the wire to the steel, and the pile is protected for as long as some zinc is left.
Copper is less reactive than steel, so the steel becomes the anode. The pile corrodes faster than it would on its own, and the copper is untouched.
Stainless steel is less reactive than plain steel, so the plain steel becomes the anode. The pile corrodes faster than it would on its own, and the stainless block is untouched.
Try the question first. Choose a hint above when you want one.
A sacrificial anode is a block of metal connected to the structure so that the block corrodes and the structure does not. To do that job it must be more reactive than the steel it protects.
When two metals are connected, the more reactive one gives up its electrons first, so it is the one that corrodes.
Steel is mostly iron, so iron (A) is no more reactive than the steel and gives no protection. Copper (C) and stainless steel (D) are less reactive than plain steel. Connected to it, they would make the steel the anode and speed up its corrosion.
Zinc is more reactive than iron, so it corrodes first. This is option (B).
Galvanising uses the same idea. Where the zinc coating is scratched, the zinc around the scratch corrodes in place of the exposed steel.
A sacrificial anode must be more reactive than the steel it protects, so that it corrodes first. Zinc is more reactive than iron.
Only mark this done when you could do it without help. Reading the solution does not count.
Question wording is from the QCAA Engineering 2025 v1.4 IA2 sample assessment instrument, and the marker lines are from its sample marking scheme, © State of Queensland (QCAA) 2026, licensed under CC BY 4.0. Figures are redrawn. The solutions, animations and commentary are Tangent Tuition’s. Tangent Tuition is not affiliated with the QCAA.
Spot a mistake on this page? Report it