Your teacher writes your IA2. This is the QCAA sample, so use it for the question shapes, and ask your teacher for practice that matches your school’s paper.
Civil structures are constructed using a variety of materials. Identify a commonly used construction material and describe an effect on the environment and on society that occur during the material’s life cycle.
The film walks one material around the six stages the syllabus lists. It stops twice, once where something happens to the land and once where something happens to people. Watch what each stop names.
Choose a material and how you would open. Then choose a life cycle stage and tap an effect card to add it to your response. The checklist shows whether each sentence counts as the material, an effect on the environment, an effect on society, or none of them. The error buttons load three responses that lose a mark.
The topic guide tabulates concrete and timber stage by stage, so those are the two offered here. The scheme also lists glass, bricks, laminates, polymers and steel as suitable materials.
How would you open?
Locked. Choose a material and a stage first.
Your sentences appear here as you choose them.
Write your own three or four sentences before you reveal each step. This is the scheme’s sample response, lightly reworded, with its three marks separated.
In the domestic building industry, treated softwood is a commonly used construction material.
One sentence names the material and says where it is used. Treated softwood is specific, and domestic building shows it is commonly used. Any of the materials in the list below would earn this mark too.
Suitable construction materials include:
Marker: identifies a commonly used construction material
It is plantation grown and considered renewable. However, the plantations destroy natural environments and affect local native plant and animal populations, because the machines used for stripping branches and removing logs for milling cause soil and undergrowth erosion and loss of habitat.
The sentence says where in the life cycle the effect occurs (harvesting the plantation), the cause (the machines that strip branches and remove logs) and the result (soil and undergrowth erosion and loss of habitat). The scheme does not require you to name a stage. Naming one is the easiest way to show the effect belongs to the life cycle.
Marker: describes one effect on the environment that occurs during the material’s life cycle
Offcuts of treated softwood create disposal hazards on site, and health and safety concerns for workers who handle and machine the chemical-laden timber.
This effect is on people, not on the land. It has a place in the life cycle (handling and disposing of offcuts on site), a cause (the chemical treatment) and a result (a hazard to the workers). The response space is twelve lines, so three or four full sentences is the right length.
Accept other suitable response consistent with a reasonable understanding.
Marker: describes one effect on society that occurs during the material’s life cycle
In the domestic building industry, treated softwood is a commonly used construction material. Mark 1 It is plantation grown and considered renewable. However, the plantations destroy natural environments and affect local native plant and animal populations, because the machines used for stripping branches and removing logs for milling cause soil and undergrowth erosion and loss of habitat. Mark 2 Offcuts of treated softwood create disposal hazards on site, and health and safety concerns for workers who handle and machine the chemical-laden timber. Mark 3
Only mark this done when you could do it without help. Reading the solution does not count.
Question wording is from the QCAA Engineering 2025 v1.4 IA2 sample assessment instrument, and the marker lines are from its sample marking scheme, © State of Queensland (QCAA) 2026, licensed under CC BY 4.0. Figures are redrawn. The solutions, animations and commentary are Tangent Tuition’s. Tangent Tuition is not affiliated with the QCAA.
Spot a mistake on this page? Report it