Engineering · Unit 3 · QCAA sample IA2 All sample IA2 questions
QCAA sample IA2 · Section 1 · Multiple choice

Question 5

[1 mark]

Your teacher writes your IA2. This is the QCAA sample, so use it for the question shapes, and ask your teacher for practice that matches your school’s paper.

The question [1 mark]

Which property describes a material’s ability to absorb energy and plastically deform under predominantly tensile forces without fracturing?

That is it. Step through the hints below to see why.

Not quite. You have picked a property of the surface. Hardness is resisting scratching, wear and indentation, and the stem is about stretching under tension.

Not quite. You have picked the reverse of what is described. Brittleness is fracture without plastic deformation.

Not quite. The sample marking scheme gives (A), ductility. This is a close call, because “absorb energy … without fracturing” is how toughness is usually defined. “Tensile” and “plastically deform” belong to ductility. The key is contestable, and a teacher could reasonably accept (D). In your own IA2, use the definitions your teacher has given you.

a test specimen, not yet loadedoriginal lengthnecktension teststretches permanently, then necks, before it breaksindentersurfacehardness testan indenter is pressed into the surfaceflat break, no neckbrittle fracturebreaks suddenly with little or no permanent stretchhammernotched barimpact testa swinging hammer strikes a notched bar

Test an option to see a material test where that property can be seen.

Each property can be seen in a material test. Blue dashed arrows are tensile forces pulling the specimen. Black arrows and the hammer are other loads. The cards under the figure check the tested property against the four phrases in the stem.

Every phrase in the stem fits. “Plastically deform under predominantly tensile forces” is permanent stretching in tension, which is what ductility is specifically about. This is the option the sample marking scheme gives.

Hardness is about the surface: resisting scratching, wear and indentation. Nothing in the stem is about the surface.

Brittleness is fracture without plastic deformation, the reverse of what the stem describes.

Toughness fits two of the four phrases. The sample marking scheme gives (A), ductility. This is a close call, because “absorb energy … without fracturing” is how toughness is usually defined. “Tensile” and “plastically deform” belong to ductility. The key is contestable, and a teacher could reasonably accept (D). In your own IA2, use the definitions your teacher has given you.

Try the question first. Choose a hint above when you want one.

The phrase that decides it is “plastically deform under predominantly tensile forces”. Ductility is the property that is specifically about permanent stretching in tension.

The sample marking scheme gives (A), ductility.

Hardness (B) is about the surface. Brittleness (C) is fracture without plastic deformation, the reverse of what is described.

This is a close call with (D), toughness, because “absorb energy … without fracturing” is how toughness is usually defined. A ductile material absorbs energy as it stretches, so the stem describes both.

When two options seem to fit, look for the words in the stem that only one of them owns. “Tensile” and “plastically deform” belong to ductility. An impact or a sudden load would point to toughness.

The key is contestable. Many textbooks define toughness in almost these words, and a teacher could reasonably accept (D). In your own IA2, use the definitions your teacher has given you.

The sample marking scheme gives (A), ductility. “Plastically deform under predominantly tensile forces” is permanent stretching in tension. The key is contestable against (D), toughness, so in your own IA2 use the definitions your teacher has given you.

(A)

Only mark this done when you could do it without help. Reading the solution does not count.

Back to the index

Question wording is from the QCAA Engineering 2025 v1.4 IA2 sample assessment instrument, and the marker lines are from its sample marking scheme, © State of Queensland (QCAA) 2026, licensed under CC BY 4.0. Figures are redrawn. The solutions, animations and commentary are Tangent Tuition’s. Tangent Tuition is not affiliated with the QCAA.