Your teacher writes your IA2. This is the QCAA sample, so use it for the question shapes, and ask your teacher for practice that matches your school’s paper.
Steel-reinforced concrete is used in the construction of multistorey buildings because it has the combined properties of
Not quite. Neither property you have picked is why the two materials are combined. Hardness is true of concrete but is not the reason for adding steel, and workability describes wet concrete before it sets, not the finished material.
Not quite. You have the half that the steel brings, tensile strength, but hardness is not what the concrete is there for. In a building frame the concrete is there to resist being squashed.
That is it. Step through the hints below to see why.
Not quite. Compressive strength is what the concrete brings, but workability describes wet concrete before it sets. You have left out what the steel adds.
Test an option to see what its pair of properties does for this loaded beam.
The beam sags, so its top face is squeezed and its bottom face is stretched. Orange solid: compression that the tested pair carries. Blue dashed: tension that the tested pair carries. Grey dotted or cracked: a face the pair leaves with nothing.
Neither property in this pair deals with the bending. Hardness is a surface property and workability belongs to wet concrete, so nothing here carries the squeezed top or the stretched bottom.
Tensile strength is half of the story: it is what the steel brings to the stretched face. Hardness is true of concrete, but it is not the property that carries the squeezed face.
Both faces are carried. The concrete’s compressive strength takes the squeezed top and the steel’s tensile strength takes the stretched bottom. Together they give what neither gives alone, so this option matches.
Compressive strength is half of the story: it is what the concrete brings. Workability describes wet concrete before it sets, so nothing in this pair holds the stretched bottom and the beam cracks there.
Try the question first. Choose a hint above when you want one.
Concrete brings compressive strength and steel brings tensile strength.
A beam or a slab bends, and bending puts one side in tension. Plain concrete is weak and brittle in tension, so the steel is placed where the tension is.
“Combined” is the key word in the stem. The question is asking what the two materials give together that neither gives alone.
Compressive strength with tensile strength is option (C).
Hardness is true of concrete but is not the reason for adding steel. Workability describes wet concrete before it sets, not the finished material.
Concrete brings compressive strength and steel brings tensile strength. “Combined” asks what the two materials give together that neither gives alone.
Only mark this done when you could do it without help. Reading the solution does not count.
Question wording is from the QCAA Engineering 2025 v1.4 IA2 sample assessment instrument, and the marker lines are from its sample marking scheme, © State of Queensland (QCAA) 2026, licensed under CC BY 4.0. Figures are redrawn. The solutions, animations and commentary are Tangent Tuition’s. Tangent Tuition is not affiliated with the QCAA.
Spot a mistake on this page? Report it